徵狀可以透過觀察結他琴碼邊角位置有沒有開始翹起，取出一張紙放進 (攝入) 琴碼底部，如果能夠通過，則代表膠水黏不住，開始分離。
We found the bridge of this Taylor guitar is lift severely.
You can see how serious from side, almost half of bridge are lift.
The most serious area is about 4mm lifting height, NO hesitation to have reglue work.
The condition of fretwire was in very bad, covered by dirt and rust.
The frewire was no more shine anymore.
The machine head needed a clean and polishing work.
配合Stewmac專用的 Bridge Caul 琴碼固定墊 及夾具進行加固。
Because it was a urgent call, we didn't take any photos during repairing, below two photos were given by the customers.
We use Iron heater to soften the glue and remove it from the guitar firstly. Then remove the old glue residue and level the bridge bottom.
Hide glue was used for this project because it provides a more stronger adhesiveness and much much stability.
After the bridge is re-glued, we clean the guitar up, change a new set of strings, bridge pins and set it up!
Tar House provides electric, acoustic, classical guitar setup, repair, parts replacement and upgrade service, please inquire at email@example.com