If you will keep the old strings at the end, please put the EAD strings on one side and GBD strings on another side. String Spreaders does a great job for that.
Please clean fretboard with polishing cloth to ensure the surface is clean without any dirt. (If you use any condition oil on the wood, you have wait 2 weeks until it dries completely. Hosco polishing cloth and Guitar Elixer are recommended.
Please use a pick or nail to squeegee the entire decal surface. apply pressure to surface. DO NOT remove transfer tape at this stage.
Cutting the decal into different part. Remove the backing paper. Take a decal out from transfer tape.
Once you are satisfied with the position, then you can apply the sticker on the location.
Applying pressure on the decal from the center to the edge with your fingers.
